Dell Networking 2048, Reference Manual

Page: 234 / 1823

234
AAA Commands
Syntax
ip https authentication
method1
[
method2
...]
no ip https authentication
•
method1
[
method2
...] — Specify at least one from the following table:
Default Configuration
The local user database is checked. This action has the same effect as the
command ip https authentication local .
Command Mode
Global Configuration mode
User Guidelines
The additional methods of authentication are used only if the previous
method returns an error, not if it fails. To ensure that the authentication
succeeds even if all methods return an error, specify none as the final method
in the command line. If none is specified as an authentication method after
radius , no authentication is used if the RADIUS server is down.
When is used as the authentication method for HTTP/HTTPS,
the Cisco ACS must be configured to allow the
shell
service. In addition, for
admin privileges, the privilege level attribute must be set to 15.
Example
The following example configures https authentication.
console(config)# ip https authentication radius local
Keyword Source or destination
local Uses the local username database for authentication.
none Uses no authentication.
radius Uses the list of all RADIUS servers for authentication.
tacacs Uses the list of all servers for authentication.
2CSNXXX_SWUM200.book Page 234 Tuesday, December 10, 2013 1:22 PM