Dell Networking 2048, Reference Manual

Page: 1549 / 1823

RMON Commands
1549
Samples Samples
----------------------------------------------------------
1 1/0/1 30 50 50 CLI
2 1/0/1 1800 50 50 Manager
show rmon events
Use the show rmon events command in User EXEC mode to display the
RMON event table. Also see the rmon event command.
Syntax
show rmon events
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
The following table describes the significant fields shown in the display:
Field Description
Index An index that uniquely identifies the event.
Description A comment describing this event.
Type The type of notification that the device generates about this event.
Can have the following values: none , log , trap , log-trap . In the case
of log, an entry is made in the log table for each event. In the case of
trap, an SNMP trap is sent to one or more management stations.
Community If an SNMP trap is to be sent, it is sent to the SNMP community
specified by this octet string.
Owner The entity that configured this event.
Last time sent The time this entry last generated an event. If this entry has not
generated any events, this value is zero.
2CSNXXX_SWUM200.book Page 1549 Tuesday, December 10, 2013 1:22 PM