73
Web Interface Operation
|
Configuring DPI Attributes
This section explains:
S
Setting the Dell DPI system attributes
S
Resetting the Dell DPI configuration to default values
S
Uploading or downloading configuration files
S
Configuring default file opening settings for Comma Separated Values (CSV) file formats
Setting Basic DPI Attributes
NOTE:
Only the administrator can configure these settings.
To configure the Dell DPI:
1
From the
System
menu, click
Configuration
. The Configuration page displays.
2
Locate the
System
table.
3
Complete entries for attributes (see Table 20).
4
Click
Save
to apply the Dell DPI configuration settings in the System table.
5
This procedure is completed.
NOTE:
These settings are in effect until the administrator enters new data and saves the changes. The present settings
can be viewed in this table at any time.
Table 20 describes the attributes in the System table.
Table 20. System
Attribute
Description
System Name
Dell system name. Limited to 31 characters. The default value is Dell PDU.
System Contact
System manager defined in MIB-II. Limited to 31 characters.
System Location
System installation locality defined in MIB-II. Limited to 31 characters.
Data Log Interval (Sec)
Polling time (in seconds) of the history log.
Web Refresh Rate (Sec)
Web refresh rate (in seconds) of the Summary, Input, and Environment pages in the
Power Management
menu. Select from 4 to 10 seconds. The default value is 10
seconds.
Returning Configuration Settings to Default Values
NOTE:
Only the administrator can configure these settings.
To return the configuration to default values:
1
From the
System
menu, click
Configuration
. The Configuration page displays.
2
Under Control, click the
Reset to Default
button.
The system is reset to the default configuration values.
3
This procedure is completed.
