Steps
1. Disconnect the speaker cable from its connector on the system board.
2. Remove the speaker cables from the guide path.
3. Lift and remove the speakers from its slot on the palmrest assembly.
Installing the speaker
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the speaker and provide a visual representation of the installation procedure.
Steps
1. Align and replace the right speaker into its slot in the palmrest assembly and route the speaker cable along the guide path.
2. Connect the speaker cable to its connector on the system board.
Next steps
1. Install the
.
2. Install the
.
3. Follow the procedure in
After working inside your computer
.
44
Disassembly and reassembly
