Removing the power button and optional fingerprint
reader - discrete
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
.
4. Remove the
.
5. Remove the
or
6. Remove the
7. Remove the
.
About this task
The figure indicates the location of the power button with optional fingerprint reader and provides a visual representation of the removal
procedure.
Steps
1. Unplug the fingerprint reader cable from the connector on the palm-rest and keyboard assembly.
2. Lift the latch, and unplug the I/O cable from the connector on the palm-rest and keyboard assembly.
3. Remove the I/O cable from the palm-rest and keyboard assembly.
4. Remove the two screws (M2x2.5) that secure the power button with optional fingerprint reader to the palm-rest and keyboard
assembly.
5. Lift the power button with optional fingerprint reader, along with the fingerprint reader cable, off the palm-rest and keyboard
assembly.
Installing the power button with finger reader - discrete
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
62
Lahtivõtmine ja kokkupanek
Summary of Contents for Latitude 5401
