Dell Latitude 3150 Owner'S Manual Download Page 33 | Manualshive

Page: 33 / 50

background image

Option

Description

Advanced Boot Options

Allows you to enable the Legacy Option
ROMs during the UEFI boot mode. This
option is enabled by default.

Date/Time

Allows you to set the date and time.

Table 3. System Configuration

Option

Description

Integrated NIC

Allows you to configure the integrated
network controller. The options are:
• Enabled UEFI Network Stack
• Disabled
• Enabled
•

Enabled w/PXE

(Default Setting)

NOTE: This option is disabled by
default. If you enable this option,
the UEFI Networking Protocols that
are available are installed, allowing
the pre-OS and the OS networking

features to use the enabled NICs.

You may have to disable the

Enabled w/PXE

to use this option.

SATA Operation

Allows you to configure the internal

SATA hard-drive controller. The options
are:
• Disabled
•

AHCI

(Default Setting)

NOTE: SATA is configured to

support AHCI mode.

Drives

Allows you to configure the SATA drives

on board. The option is:
• SATA-0
• SATA-1

Default Setting: Both drives are enabled.

SMART Reporting

This field controls if the hard drive errors

for the integrated drives are reported
during system startup. This technology
is part of the SMART (Self Monitoring

Analysis and Reporting Technology)
specification.
•

Enable SMART Reporting

— This

option is disabled by default.

USB Configuration

Allows you to define the USB

configuration. The options are:
• Enable Boot Support

33

«
...
31
32
33
34
35
...
»

Summary of Contents for Latitude 3150



















































Reviews:

No comments

Related manuals for Latitude 3150

Brand: IBM Pages: 4

Brand: IBM Pages: 189

Brand: IBM Pages: 4

Brand: IBM Pages: 6

Brand: IBM Pages: 5

Brand: IBM Pages: 6

Brand: IBM Pages: 3

Brand: IBM Pages: 116

Brand: IBM Pages: 10

Brand: IBM Pages: 2

Brand: IBM Pages: 134

Brand: IBM Pages: 88

Brand: IBM Pages: 229

Brand: IBM Pages: 124

Brand: IBM Pages: 2

Toughbook CF-T7BWATZJM

Brand: Panasonic Pages: 44

NOTEBOOK Q7M ENTERTAINMENT XD

Brand: YAKUMO Pages: 41

Brand: Hama Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands