b.
battery
3.
Pry the clips securing the memory module until the memory pops-up and remove the memory from
the system board.
Installing the Memory
1.
Insert the memory on the memory socket until the clips secure the memory.
2.
Install the:
a.
battery
b.
base cover
3.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Coin-Cell Battery
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
base cover
b.
battery
3.
Perform the following steps:
a. Disconnect the coin-cell battery cable from its connector on the system board [1].
b. Peel the adhesive tape to release the coin-cell battery cable [2].
c. Release the coin-cell battery cable from its routing channels [3].
d. Pry the coin-cell battery to remove it from the computer [4].
22
