Installing the Camera
1.
Insert the camera into its place on the display assembly.
2.
Connect the camera cable to its connector on the display assembly.
3.
Install the:
a.
display bezel
b.
display assembly
c.
battery
d.
base cover
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Power-Connector Port
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
base cover
b.
battery
c.
display assembly
3.
Perform the following steps:
a. Disconnect the power-connector port cable from its connector on the system board [1].
b. Remove the power-connector port from the computer [2].
17
