Steps
1. Using the alignment posts and rubber grommets, replace the speaker into the slots on the computer chassis.
2. Route the speaker cable through the routing channel.
3. Affix the adhesive tapes to secure the speaker cable on the system board.
4. Connect the speaker cable to the connector on the system board.
Next steps
1. Install the
palmrest and keyboard assembly
after working inside your computer
.
Coin-cell battery
Removing the coin-cell battery
Prerequisites
before working inside your computer
.
2. Remove the
palmrest and keyboard assembly
.
Removing and installing components
21
Summary of Contents for Latitude 3120
