manualshive.com logo in svg

Dell Latitude 12 7212, Owner'S Manual, Page: 36 / 79

Share
Download
Dell Latitude 12 7212 Owner'S Manual Download Page 36

a

Battery

b

Display assembly

c

Heat sink

3 

To remove the system fan:

a Locate the system fan.
b Release the cable that connects the system fan on the system board with a plastic scribe [1].

NOTE: 

Push the bulge edge of the system fan connector by a plastic scribe.

c Remove the speaker cable from the routing channel [2].

CAUTION: 

Ensure to unroute the cable, to avoid damaging the cable and cable connector.

d Remove the screws (3) that secure the system fan on the system board [3].

NOTE: 

Ensure to remove the heatsink, before removing the system fan.

Attention: 

To remove the system fan and heatsink combo, remove the screws (4) in arc U and the screws (2) 

diagonally opposite that secures the heatsink on the system board.

Installing system fan

1 

Align the system fan in the slot on the system chassis.

2 

Route the speaker cable through the routing channel.

3 

Replace the screws (3) to secure the system fan to the tablet chassis.

4 

Connect the system fan cable to the system board.

36

Removing and installing components

Summary of Contents for Latitude 12 7212
















































































Reviews:

No comments