Dell Latitude 12 7212, Owner'S Manual, Page: 34 / 79

NOTE: Ensure the SSD card in connected in the slot on the system board.
2 Replace the screws (4) to secure the heat sink to the tablet chassis.
3 Install the:
a Display assembly
b Battery
4 Follow the procedure in After working inside your computer .
PCIe Solid State Drive (SSD)
Removing PCIe Solid State Drive (SSD)
1 Follow the procedure in Before working inside your computer .
2 Remove the:
a Battery
b Display assembly
c Heat sink
3 To remove the SDD:
a Place the back side of system on a flat surface.
b Locate the SSD.
NOTE: SSD is positioned below heatsink. Ensure to remove heat sink .
NOTE: HDD is not shipped with the tablet.
c Remove the screws (1) that secures the SSD on the system board [1].
d Slide and lift the SSD card from the connector on the system board [2].
NOTE: Ensure to lift the SSD card by an angle NOT more than 30°.
34 Removing and installing components