Dell Latitude 12 7212, Owner'S Manual, Page: 27 / 79

Power connector port and micro serial port are assembled as one single component to connect on the tablet system board.
NOTE: Malfunction of either component requires to remove both power connector port and micro serial port.
Installing micro serial port and power connector port
1 Insert the power connector port and micro serial port into the slot on the chassis.
2 Align the metal bracket that secures the ports on the chassis.
3 Replace the screws (5) to secure the micro serial port and power connector port to the chassis.
4 Align the rubber bracket and push to slide in the channel .
NOTE: Rubber bracket ensures to secure the micro serial port cable from damage.
5 Insert the micro serial port cable into the connector.
6 Release the latch to secure the micro serial port cable to the system board.
7 Align the power connector cable and replace the screw (1) to secure the power connector port on the system board.
NOTE: Ensure to replace the screw, which enables the power connector port to charge the battery.
8 Install the:
a Display assembly
b Battery
9 Follow the procedure in After working inside your computer .
Front camera
Removing front camera
1 Follow the procedure in Before working inside your computer .
2 Remove the:
a Battery
b Display assembly
3 To remove the front camera:
a Place the back side of system on a flat surface.
b Locate the front camera.
Removing and installing components 27