Dell Inspiron One 2330 Owner'S Manual Download Page 146

Page: 146 / 158

146

System Setup

Advanced — CPU Feature

Intel(R) SpeedStep

Technology

Allows you to enable or disable the Intel SpeedStep
feature for the processor

Enabled or Disabled (Enabled by default)

Intel(R)

Virtualization

Technology

Allows you to enable or disable the
Intel virtualization feature for the processor

Enabled or Disabled (Enabled by default)

CPU XD Support

Allows you to enable or disable the execute disable
mode for the processor

Enabled or Disabled (Enabled by default)

Limit CPUID Value

Allows you to limit the maximum value the
processor standard CPUID function will support

Enabled or Disabled (Disabled by default)

Multi Core Support

Allows you to specify if processor will have either
one or all cores enabled

Enabled or Disabled (Enabled by default)

Enabled - all cores; Disabled - one core only

Intel(R) Turbo Boot

Technology

Allows you to enable or disable the Intel turbo boot
technology mode for the processor

Enabled or Disabled (Enabled by default)

Advanced — USB Configuration

Rear USB Ports

Allows you to enable or disable the rear USB ports
on your computer

Enabled or Disabled (Enabled by default)

Side USB Ports

Allows you to enable or disable the side USB ports
on your computer

Enabled or Disabled (Enabled by default)

OM_Book.book Page 146 Friday, March 30, 2012 1:21 PM

Summary of Contents for Inspiron One 2330































































































































































Search results

Summary of Contents for Inspiron One 2330

Reviews:

Related manuals for Inspiron One 2330

Brands by name

Popular brands

Dell Inspiron One 2330, Owner'S Manual

Search results

Summary of Contents for Inspiron One 2330

Reviews:

Related manuals for Inspiron One 2330

Brands by name

Popular brands