Dell Inspiron One 2330 Owner'S Manual Download Page 61

Page: 61 / 158

Speakers

WARNING:

Before working inside your computer, read the safety information that

shipped with your computer and follow the steps in "Before You Begin" on page 11.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.

Removing the Speakers

Prerequisites

Remove the stand. See "Removing the Stand" on page 19.

Remove the back cover. See "Removing the Back Cover" on page 23.

Remove the VESA-mount bracket.
See "Removing the VESA-Mount Bracket" on page 43.

Remove the system-board shield.
See "Removing the System-Board Shield" on page 49.

OM_Book.book Page 61 Friday, March 30, 2012 1:21 PM

Summary of Contents for Inspiron One 2330































































































































































Search results

Summary of Contents for Inspiron One 2330

Reviews:

Related manuals for Inspiron One 2330

Brands by name

Popular brands

Dell Inspiron One 2330, Owner'S Manual

Search results

Summary of Contents for Inspiron One 2330

Reviews:

Related manuals for Inspiron One 2330

Brands by name

Popular brands