Dell Inspiron One 2330 Owner'S Manual Download Page 124

Page: 124 / 158

124

Display Panel

Remove the power-supply fan bracket.
See "Removing the Power-Supply Fan Bracket" on page 77.

Remove the B-CAS card. See "Removing the B-CAS Card" on page 25.

Remove the I/O cover. See "Removing the I/O Cover" on page 81.

Remove the I/O board shield.
See "Removing the I/O Board Shield" on page 85.

Remove the power-supply unit.
See "Removing the Power-Supply Unit" on page 89.

Remove the speakers. See "Removing the Speakers" on page 61.

Remove the I/O board. See "Removing the I/O Board" on page 105.

Remove the processor heat-sink.
See "Removing the Processor Heat-Sink" on page 65.

Remove the processor heat-sink fan.
See "Removing the Processor Heat-Sink Fan" on page 69.

Follow the instructions from step 1 to step 3 in "Removing the System
Board" on page 113.

OM_Book.book Page 124 Friday, March 30, 2012 1:21 PM

Summary of Contents for Inspiron One 2330































































































































































Search results

Summary of Contents for Inspiron One 2330

Reviews:

Related manuals for Inspiron One 2330

Brands by name

Popular brands

Dell Inspiron One 2330, Owner'S Manual

Search results

Summary of Contents for Inspiron One 2330

Reviews:

Related manuals for Inspiron One 2330

Brands by name

Popular brands