System Setup Utility: Dell Inspiron One 2305/2310 Service Manual
file:///T|/htdocs/systems/InsOne2310/sr/sm/sys_setu.htm[7/25/2012 10:25:09 AM]
8. Replace the system-board shield (see
Replacing the System-Board Shield
).
9. Replace the back cover (see
Replacing the Back Cover
).
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain
inside the computer. Failure to do so may result in damage to the computer.
10. Connect your computer and devices to electrical outlets, and turn them on.
Clearing CMOS Passwords
WARNING:
Before you begin any of the procedures in this section, follow the safety instructions that
shipped with your computer.
WARNING:
The computer must be disconnected from the electrical outlet to clear the CMOS setting.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to
servicing that is not authorized by Dell™ is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as a connector on your computer).
1. Follow the instructions in
Before You Begin
.
2. Remove the back cover (see
Removing the Back Cover
).
3. Remove the system-board shield (see
Removing the System-Board Shield
).
4. Locate the 3-pin CMOS reset jumper (CLR_CMOS) on the system board. (see
System Board Components
).
5. Remove the 2-pin jumper plug from pins 2 and 3 and fix it on pins 1 and 2.
Inspiron One 2305
