MXM-Assembly Fan (Optional): Dell Inspiron One 2305/2310 Service Manual
file:///T|/htdocs/systems/InsOne2310/sr/sm/mxm_fan.htm[7/25/2012 10:24:56 AM]
3
MXM-assembly fan cable
Replacing the MXM-Assembly Fan
1. Follow the instructions in
Before You Begin
.
2. Align the screw holes on the MXM-assembly fan with the screw holes screw holes on the hex nut screw.
3. Adhere the silver foil to the MXM-assembly heat sink.
4. Replace the two screws that secure the MXM-assembly fan to the system board.
5. Connect the MXM-assembly fan cable to the connector (MXM FAN) on the system board.
6. Replace the system-board shield (see
Replacing the System-Board Shield
).
7. Follow the instructions from
step 4
to
step 5
in
Replacing the Front Stand
.
8. Replace the back cover (see
Replacing the Back Cover
).
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain
inside the computer. Failure to do so may result in damage to the computer.
9. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page