Dell Inspiron One 2305 Service Manual Download Page 66

Page: 66 / 96

Processor: Dell Inspiron One 2305/2310 Service Manual

file:///T|/htdocs/systems/InsOne2310/sr/sm/processo.htm[7/25/2012 10:25:00 AM]

5. Replace the MXM-assembly (see

Replacing the MXM Assembly

6. Replace the MXM-assembly fan (see

Replacing the MXM-Assembly Fan

7. Replace the system-board shield (see

Replacing the System-Board Shield

8. Follow the instructions from

step 4

step 5

Replacing the Front Stand

9. Replace the back cover (see

Replacing the Back Cover

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain

inside the computer. Failure to do so may result in damage to the computer.

10. Connect your computer and all attached devices to electrical outlets, and then turn them on.

Back to Contents Page

Summary of Contents for Inspiron One 2305

































































































Search results

Summary of Contents for Inspiron One 2305

Reviews:

Related manuals for Inspiron One 2305

Brands by name

Popular brands

Dell Inspiron One 2305, Service Manual

Search results

Summary of Contents for Inspiron One 2305

Reviews:

Related manuals for Inspiron One 2305

Brands by name

Popular brands