Infrared Blaster Connector: Dell Inspiron One 2305/2310 Service Manual
file:///T|/htdocs/systems/InsOne2310/sr/sm/ir.htm[7/25/2012 10:24:52 AM]
1. Follow the instructions in
Before You Begin
.
2. Slide the IR blaster connector into the slot on the system-board shield.
3. Replace the nut that secures the IR blaster connector to the system-board shield.
4. Follow the instructions from
step 4
to
step 8
in
Replacing the System-Board Shield
.
5. Follow the instructions from
step 4
to
step 5
in
Replacing the Front Stand
.
6. Replace the back cover (see
Replacing the Back Cover
).
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain
inside the computer. Failure to do so may result in damage to the computer.
7. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page