manualshive.com logo in svg

Dell Inspiron 660s, Owner'S Manual, Page: 83 / 94

Share
Download
Dell Inspiron 660s Owner'S Manual Download Page 83

System Setup

79

2nd Boot

Displays the second boot device

3rd Boot

Displays the third boot device

4th Boot

Displays the fourth boot device

5th Boot

Displays the fifth boot device

Power

Wake Up by Integrated 

LAN/WLAN

Allow the computer to be powered on by 
special LAN or wireless LAN signals

Enabled or Disabled (Disabled by default)

AC Recovery

Allows you to configure the behavior of your 
computer after it recovers from a power failure

Power Off, Power On, or Last Power State 
(Power Off by default)

Auto Power On

Allows you to enable or disable the computer 
from turning on automatically

Enabled or Disabled (Disabled by default)

Auto Power On Mode

Allows you to set the computer to turn on 
automatically every day or on a preselected date; 
This option can be configured only if the Auto 
Power On mode is set to Enabled

Everyday or Selected Day (Selected Day by 
default)

Auto Power On Date

Allows you to set the date on which the 
computer must turn on automatically; This 
option can be configured only if the Auto Power 
On mode is set to Enabled

1 to 31 (15 by default)

Auto Power On Time

Allows you to set the time at which the 
computer must turn on automatically; This 
option can be configured only if the Auto Power 
On mode is set to Enabled

hh:mm:ss (12:30:30 by default)

Boot 

(continued)

book.book  Page 79  Thursday, April 5, 2012  5:38 PM

Summary of Contents for Inspiron 660s































































































Reviews:

No comments