manualshive.com logo in svg

Dell Inspiron 660s, Owner'S Manual, Page: 51 / 94

Share
Download
Dell Inspiron 660s Owner'S Manual Download Page 51

Front I/O Panel

47

Front I/O Panel

 

WARNING: 

Before working inside your computer, read the safety information 

that shipped with your computer and follow the steps in "Before You Begin" on 
page 9. For additional safety best practices information, see the Regulatory 
Compliance Homepage at dell.com/regulatory_compliance.

Removing the Front I/O Panel

Prerequisites

1

Remove the computer cover. See "Removing the Computer Cover" on 
page 17.

2

Remove the fan shroud. See "Removing the Fan Shroud" on page 19.

3

Remove the front bezel. See "Removing the Front Bezel" on page 33.

4

Remove the drive cage. See "Removing the Drive Cage" on page 37

5

Remove the PCI-Express x16 card, if applicable. See "Removing the PCI-
Express Cards" on page 25.

Procedure

1

Disconnect the front I/O panel cables from the system-board connectors 
(USBF1, USBF2, and AUDF1 ). See "System Board Components" on 
page 15. 

 

NOTE: 

Note the routing of all cables as you remove them so that you can re-

route them correctly after you replace the front I/O panel.

book.book  Page 47  Thursday, April 5, 2012  5:38 PM

Summary of Contents for Inspiron 660s































































































Reviews:

No comments