Dell Inspiron 5680 Service Manual Download

Page: 130 / 130

•

Setting up and using your product

•

Data backup

•

Troubleshooting and diagnostics

•

Factory and system restore

•

BIOS information

To locate the

Me and My Dell

relevant to

your product, identify your product

through one of the following:

•

Select

Detect Product

•

Locate your product through the

drop-down menu under

View

Products

•

Enter the

Service Tag number

Product ID

in the search bar.

Contacting Dell

To contact Dell for sales, technical support, or customer service issues, see

www.dell.com/contactdell

NOTE: Availability varies by country and product, and some services may
not be available in your country.

NOTE: If you do not have an active internet connection, you can find

contact information on your purchase invoice, packing slip, bill, or Dell
product catalog.

130

Summary of Contents for Inspiron 5680



































































































































Search results

Summary of Contents for Inspiron 5680

Reviews:

Related manuals for Inspiron 5680

Brands by name

Popular brands

Dell Inspiron 5680, Service Manual

Search results

Summary of Contents for Inspiron 5680

Reviews:

Related manuals for Inspiron 5680

Brands by name

Popular brands