Dell Inspiron 5680 Service Manual Download

Page: 95 / 130

Replacing the top cover

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in

Before

working inside your computer

. After working inside your computer, follow

the instructions in

After working inside your computer

. For more safety best

practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

Procedure

Align the tabs on the top cover with the slots on the chassis.

Slide the top cover towards the front of the chassis and secure the top cover in
place.

Replace the screw (M3x5) that secures the top cover to the chassis.

Place the computer in an upright position.

Post-requisites

Replace the

right-side cover

Summary of Contents for Inspiron 5680



































































































































Search results

Summary of Contents for Inspiron 5680

Reviews:

Related manuals for Inspiron 5680

Brands by name

Popular brands

Dell Inspiron 5680, Service Manual

Search results

Summary of Contents for Inspiron 5680

Reviews:

Related manuals for Inspiron 5680

Brands by name

Popular brands