4.
Connect the DC power cables to the system board and drives.
5.
Secure all the cables to the securing clip on the side of the power supply.
6.
Replace the computer cover (see
Replacing the Computer Cover
).
7.
Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
NOTE:
Route the DC power cables under the chassis tabs. The cables must be properly routed to prevent the cables from being damaged.
NOTE:
Double-check all cable connections to make sure they are secure.
CAUTION:
To help avoid damaging your computer, ensure that the voltage selector switch is set for the voltage that most closely matches the AC
power available in your location.
Summary of Contents for Inspiron 560
Page 5: ...Back to Contents Page ...
Page 41: ...Back to Contents Page ...
Page 44: ...Back to Contents Page ...