8.
Connect your computer and devices to electrical outlets, and turn them on.
Clearing CMOS Settings
1.
Follow the procedures in
Before You Begin
.
2.
Remove the computer cover (see
Removing the Computer Cover
).
3.
Reset the current CMOS settings:
a.
Locate the 3-pin CMOS reset jumper on the system board (see
System Board Components
).
b.
Remove the jumper plug from the CMOS reset jumper pins 2 and 3.
c.
Place the jumper plug on the CMOS reset jumper pins 1 and 2 and wait for approximately five seconds.
d.
Remove the jumper plug and replace it on the CMOS reset jumper pins 2 and 3.
Inspiron 560
Inspiron 570
NOTE:
The computer must be disconnected from the electrical outlet to clear the CMOS setting.
Summary of Contents for Inspiron 560
Page 5: ...Back to Contents Page ...
Page 41: ...Back to Contents Page ...
Page 44: ...Back to Contents Page ...
