Dell Inspiron 560 Service Manual Download Page 32

Page: 32 / 44

Processor L1 Cache

Displays the amount of processor Level 1 cache

Processor L2 Cache

Displays the amount of processor Level 2 cache

Memory Installed

Indicates the amount of installed memory

Memory Available

Indicates the amount of available memory

Memory Speed

Indicates the frequency of installed memory

Memory Technology

Indicates the type of installed memory

Standard CMOS Features

Date

Displays current date in the format (mm:dd:yyyy)

Time

Displays current time in the format (hh:mm:ss)

SATA 0

Displays the SATA drives connected to the SATA 0 connector

SATA 1

Displays the SATA drives connected to the SATA 1 connector

SATA 2

Displays the SATA drives connected to the SATA 2 connector

SATA 3

Displays the SATA drives connected to the SATA 3 connector

Advanced BIOS Features

CPU Feature

Hyper-Threading Technology

—

Enabled; Disabled (Enabled by default)

Intel SpeedStep

—

Enabled; Disabled (Enabled by default)

Virtualization

—

Enabled; Disabled (Disabled by default)

Limit CPUID Value

—

Enabled; Disabled (Disabled by default)

CPU XD Support

—

Enabled; Disabled (Enabled by default)

Multi Core Support

—

Enabled; Disabled (Enabled by default)

USB Device Setting

USB Controller

—

Enabled; Disabled (Enabled by default)

USB Operation Mode

—

HiSpeed; FullSpeed (HiSpeed by default)

Advanced Chipset Features

Onboard Audio

Controller

Enabled; Disabled (Enabled by default)

SATA Mode

ATA; AHCI (AHCI by default)

Onboard LAN Controller

Enabled; Disabled (Enabled by default)

Onboard LAN Boot ROM

Enabled; Disabled (Disabled by default)

Boot Device Configuration

Boot Settings

Configuration

Fast Boot

—

Enabled; Disabled (Enabled by default)

Numlock Key

—

On; Off (On by default)

Keyboard Errors

—

Report; Do Not Report (Report by default)

Removable Boot Priority

Used to set the device priority of removable devices like USB floppy drives. The items displayed are dynamically updated
according to the removable devices connected

Hard Disk Boot Priority

Used to set the device priority of hard drives. The items displayed are dynamically updated according to the hard drives detected

CD/DVD Boot Priority

Used to set the device priority of CD/DVD drives. The items displayed are dynamically updated according to the CD/DVD drives
detected

Network Boot Priority

Used to set the device priority of network devices. The items displayed are dynamically updated according to the network devices
detected

USB Boot Priority

Used to set the device priority of USB drives. The items displayed are dynamically updated according to the USB drives detected

1st Boot Device

Removable Dev.; Hard Drive; CD/DVD; Network; USB; Disabled (Hard Drive by default)

2nd Boot Device

Removable Dev.; Hard Drive; CD/DVD; Network; USB; Disabled (USB by default)

3rd Boot Device

Removable Dev.; Hard Drive; CD/DVD; Network; USB; Disabled (CD/DVD by default)

4th Boot Device

Removable Dev.; Hard Drive; CD/DVD; Network; USB; Disabled (Removable Dev. by default)

5th Boot Device

Removable Dev.; Hard Drive; CD/DVD; Network; USB; Disabled (Network by default)

Power Management Setup

ACPI Suspend Type

S1; S3 (S3 by default)

Remote Wake Up

Enabled; Disabled (Enabled by default)

AC Recovery

Power Off; Power On; Last Power State (Power Off by default)

Auto Power On

Enabled; Disabled (Disabled by default)

Auto Power On Date

Auto Power On Time

0:00:00

Summary of Contents for Inspiron 560













































Search results

Summary of Contents for Inspiron 560

Reviews:

Related manuals for Inspiron 560

Brands by name

Popular brands

Dell Inspiron 560, Service Manual

Search results

Summary of Contents for Inspiron 560

Reviews:

Related manuals for Inspiron 560

Brands by name

Popular brands