Dell Inspiron 5593 Service Manual Download

Page: 4 / 83

Replacing the display assembly.....................................................................................................................................41

Power-adapter port............................................................................................................................................................ 43

Removing the power-adapter port..............................................................................................................................43
Replacing the power-adapter port.............................................................................................................................. 44

I/O board.............................................................................................................................................................................. 45

Removing the I/O board...............................................................................................................................................45
Replacing the I/O board............................................................................................................................................... 46

Coin-cell battery.................................................................................................................................................................. 47

Removing the coin-cell battery....................................................................................................................................47
Replacing the coin-cell battery.................................................................................................................................... 48

Power button....................................................................................................................................................................... 49

Removing the power button........................................................................................................................................ 49
Replacing the power button.........................................................................................................................................50

System board.......................................................................................................................................................................50

Removing the system board........................................................................................................................................ 50
Replacing the system board.........................................................................................................................................53

Power button with fingerprint reader...............................................................................................................................56

Removing the power button with fingerprint reader................................................................................................56
Replacing the power button with fingerprint reader.................................................................................................57

Palm-rest and keyboard assembly.................................................................................................................................... 58

Removing the palm-rest and keyboard assembly......................................................................................................58
Replacing the palm-rest and keyboard assembly...................................................................................................... 59

Display bezel.........................................................................................................................................................................60

Removing the display bezel..........................................................................................................................................60
Replacing the display bezel........................................................................................................................................... 61

Camera..................................................................................................................................................................................62

Removing the camera................................................................................................................................................... 62
Replacing the camera....................................................................................................................................................63

Display panel.........................................................................................................................................................................64

Removing the display panel..........................................................................................................................................64
Replacing the display panel.......................................................................................................................................... 66

Display cable.........................................................................................................................................................................68

Removing the display cable..........................................................................................................................................68
Replacing the display cable.......................................................................................................................................... 69

Display back-cover and antenna assembly.......................................................................................................................70

Removing the display back-cover and antenna assembly........................................................................................70
Replacing the display back-cover and antenna assembly......................................................................................... 71

3 Device drivers............................................................................................................................ 73

4 System setup............................................................................................................................. 77

System setup........................................................................................................................................................................77

Contents

Summary of Contents for Inspiron 5593




















































































Search results

Summary of Contents for Inspiron 5593

Reviews:

Related manuals for Inspiron 5593

Brands by name

Popular brands

Dell Inspiron 5593, Service Manual

Search results

Summary of Contents for Inspiron 5593

Reviews:

Related manuals for Inspiron 5593

Brands by name

Popular brands