Dell Inspiron 5593 Service Manual Download | Manualshive

Page: 77 / 83

background image

System setup

NOTE:

Depending on the computer and its installed devices, the items listed in this section may or may not be displayed.

Topics:

•

•

Entering BIOS setup program

•

Navigation keys

•

•

Clearing CMOS settings

•

Clearing BIOS (System Setup) and System passwords

System setup

CAUTION:

Unless you are an expert computer user, do not change the settings in the BIOS Setup program. Certain

changes can make your computer work incorrectly.

NOTE:

Before you change BIOS Setup program, it is recommended that you write down the BIOS Setup program screen

information for future reference.

Use the BIOS Setup program for the following purposes:

•

Get information about the hardware installed in your computer, such as the amount of RAM and the size of the hard drive.

•

Change the system configuration information.

•

Set or change a user-selectable option, such as the user password, type of hard drive installed, and enabling or disabling base devices.

Entering BIOS setup program

1. Turn on (or restart) your computer.
2. During POST, when the DELL logo is displayed, watch for the F2 prompt to appear, and then press F2 immediately.

NOTE:

The F2 prompt indicates that the keyboard is initialized. This prompt can appear very quickly, so you must

watch for it, and then press F2. If you press F2 before the F2 prompt, this keystroke is lost. If you wait too long and
the operating system logo appears, continue to wait until you see the desktop. Then, turn off your computer and try
again.

Navigation keys

NOTE:

For most of the System Setup options, changes that you make are recorded but do not take effect until you

restart the system.

Keys

Navigation

Up arrow

Moves to the previous field.

Down arrow

Moves to the next field.

Enter

Selects a value in the selected field (if applicable) or follow the link in the field.

Spacebar

Expands or collapses a drop-down list, if applicable.

Tab

Moves to the next focus area.

Esc

Moves to the previous page until you view the main screen. Pressing Esc in the main screen displays a message
that prompts you to save any unsaved changes and restarts the system.

4

System setup

77

«
...
75
76
77
78
79
...
»

Summary of Contents for Inspiron 5593




















































































Reviews:

No comments

Related manuals for Inspiron 5593

Brand: Panasonic Pages: 32

Brand: Panasonic Pages: 40

Brand: Panasonic Pages: 46

EasyNote TE69KB

Brand: Packard Bell Pages: 120

Chromebook CB315-3H

Brand: Acer Pages: 33

Chromebook CB5-132T

Brand: Acer Pages: 36

Brand: Acer Pages: 32

Brand: Fujitsu Pages: 32

Brand: Toshiba Pages: 8

Brand: AWOW Pages: 17

Brand: AWOW Pages: 36

Brand: Samsung Pages: 34

Brand: Samsung Pages: 78

Brand: Samsung Pages: 83

Brand: Samsung Pages: 128

Brand: Clevo Pages: 94

Brand: Clevo Pages: 116

Brand: Clevo Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands