Dell Inspiron 5593 Service Manual Download

Page: 60 / 83

Post-requisites

1. Replace the

power button with fingerprint reader

(optional).

2. Replace the

3. Replace the

4. Replace the

5. Replace the

6. Replace the

7. Replace the

hard drive with Intel Optane

8. Replace the

speakers

9. Replace the

wireless card

10. Replace the

solid-state drive/Intel Optane

11. Replace the

fan

12. Replace the

battery

13. Replace the

base cover

Display bezel

Removing the display bezel

NOTE:

Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance

Prerequisites

1. Remove the

base cover

Removing and installing components

Summary of Contents for Inspiron 5593




















































































Search results

Summary of Contents for Inspiron 5593

Reviews:

Related manuals for Inspiron 5593

Brands by name

Popular brands

Dell Inspiron 5593, Service Manual

Search results

Summary of Contents for Inspiron 5593

Reviews:

Related manuals for Inspiron 5593

Brands by name

Popular brands