Dell Inspiron 5593 Service Manual Download | Manualshive

Page: 74 / 83

background image

13. For manual download and installation, click

Category

.

14. Click

Network

in the drop-down list.

15. Click

Download

to download the network driver for your computer.

16. After the download is complete, navigate to the folder where you saved the network driver file.
17. Double-click the network driver file icon and follow the instructions on the screen to install the driver.

Downloading the chipset driver

1. Turn on your computer.
2. Go to

www.dell.com/support

.

3. Enter the Service Tag of your computer, and then click

Submit

.

NOTE:

If you do not have the Service Tag, use the auto-detect feature or manually browse for your computer model.

4. Click

Drivers & downloads

.

5. Click the

Detect Drivers

button.

6. Review and agree to the Terms and Conditions to use

SupportAssist

, then click

Continue

.

7. If necessary, your computer starts to download and install

SupportAssist

.

NOTE:

Review on-screen instructions for browser-specific instructions.

8. Click

View Drivers for My System

.

9. Click

Download and Install

to download and install all driver updates detected for your computer.

10. Select a location to save the files.
11. If prompted, approve requests from

User Account Control

to make changes on the system.

12. The application installs all drivers and updates identified.

NOTE:

Not all files can be installed automatically. Review the installation summary to identify if manual installation is

necessary.

13. For manual download and installation, click

Category

.

14. Click

Chipset

in the drop-down list.

15. Click

Download

to download the chipset driver for your computer.

16. After the download is complete, navigate to the folder where you saved the saved the chipset driver file.
17. Double-click the chipset driver file icon and follow the instructions on the screen to install the driver.

Downloading the media-card reader driver

1. Turn on your computer.
2. Go to

www.dell.com/support

.

3. Enter the Service Tag of your computer, and then click

Submit

.

NOTE:

If you do not have the Service Tag, use the auto-detect feature or manually browse for your computer model.

4. Click

Drivers & downloads

.

5. Click the

Detect Drivers

button.

6. Review and agree to the Terms and Conditions to use

SupportAssist

, then click

Continue

.

7. If necessary, your computer starts to download and install

SupportAssist

.

NOTE:

Review on-screen instructions for browser-specific instructions.

8. Click

View Drivers for My System

.

9. Click

Download and Install

to download and install all driver updates detected for your computer.

10. Select a location to save the files.
11. If prompted, approve requests from

User Account Control

to make changes on the system.

12. The application installs all drivers and updates identified.

NOTE:

Not all files can be installed automatically. Review the installation summary to identify if manual installation is

necessary.

74

Device drivers

«
...
72
73
74
75
76
...
»

Summary of Contents for Inspiron 5593




















































































Reviews:

No comments

Related manuals for Inspiron 5593

Brand: Panasonic Pages: 36

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 40

Brand: Panasonic Pages: 28

Brand: Panasonic Pages: 20

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 56

Toughbook CF-18 Series

Brand: Panasonic Pages: 48

NP-Q1 User Manual (Vista)

Brand: Samsung Pages: 212

Blade Pro RZ09-0287

Brand: Razer Pages: 18

ActionNote 800 Series

Brand: Epson Pages: 17

Brand: Haier Pages: 18

Vaio PCG-V505AX

Brand: Sony Pages: 1

Brand: Sony Pages: 1

VAIO PCG-TR3AP3

Brand: Sony Pages: 1

VAIO PCG-TR3AP2

Brand: Sony Pages: 1

Brand: Sony Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands