Dell Inspiron 5405 Service Manual Download Page 4

Page: 4 / 76

Heat sink..............................................................................................................................................................................38

Removing the heat sink............................................................................................................................................. 38
Installing the heat sink................................................................................................................................................39

Display assembly................................................................................................................................................................40

Removing the display assembly............................................................................................................................... 40
Installing the display assembly..................................................................................................................................42

Power-adapter port.......................................................................................................................................................... 44

Removing the power-adapter port..........................................................................................................................44
Installing the power-adapter port............................................................................................................................45

Speakers.............................................................................................................................................................................. 46

Power button with fingerprint reader........................................................................................................................... 51

Removing the power-button with optional fingerprint reader.......................................................................... 51
Installing the power-button with optional fingerprint reader............................................................................ 51

Touchpad.............................................................................................................................................................................52

Removing the touchpad.............................................................................................................................................52
Installing the touchpad...............................................................................................................................................53

I/O board.............................................................................................................................................................................55

Removing the I/O board............................................................................................................................................55
Installing the I/O board..............................................................................................................................................55

System board..................................................................................................................................................................... 56

Removing the system board..................................................................................................................................... 56
Installing the system board....................................................................................................................................... 58

Palm-rest and keyboard assembly................................................................................................................................ 60

Removing the palm-rest and keyboard assembly................................................................................................60
Installing the palm-rest and keyboard assembly...................................................................................................61

Chapter 3: Drivers and downloads............................................................................................... 62

Chapter 4: System setup............................................................................................................. 63

Updating the BIOS............................................................................................................................................................ 69

Chapter 5: Troubleshooting......................................................................................................... 72

SupportAssist diagnostics............................................................................................................................................... 72

Contents

Summary of Contents for Inspiron 5405













































































Search results

Summary of Contents for Inspiron 5405

Reviews:

Related manuals for Inspiron 5405

Brands by name

Popular brands

Dell Inspiron 5405, Service Manual

Search results

Summary of Contents for Inspiron 5405

Reviews:

Related manuals for Inspiron 5405

Brands by name

Popular brands