3. Disconnect the power-adapter port cable from the system board.
4. Remove the (M2x3) screw that secures the power-adapter port to the palm-rest and keyboard assembly.
5. Remove the power-adapter port cable from the routing guides on the palm-rest and keyboard assembly.
6. Lift the power-adapter port off the palm-rest and keyboard assembly.
Installing the power-adapter port
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the power-adapter port and provides a visual representation of the installation
procedure.
Steps
1. Place the power-adapter port into the slot on the palm-rest and keyboard assembly.
2. Replace the (M2x3) screw that secures the power-adapter port on the palm-rest and keyboard assembly.
3. Route the power-adapter port cable through the routing guides on the palm-rest and keyboard assembly.
4. Connect the power-adapter port cable to the system board.
5. Press down the right display-hinge and align the screw holes on the display hinges with the screw holes on the system
board.
6. Replace the two (M2.5x5) screws that secure the right display-hinge to the system board.
Next steps
1. Install the
.
After working inside your computer
.
Removing and installing components
45
