Steps
1. Using the alignment posts, place the I/O board on the palm-rest and keyboard assembly.
2. Replace the (M2x3) screw that secures the I/O board to the palm-rest and keyboard assembly.
3. Connect the coin-cell battery cable to the I/O board.
4. Connect the power-button board cable to the I/O board and close the latch.
5. Connect the I/O-board cable to the I/O board and close the latch.
6. Adhere the tape that secures the I/O-board cable latch to the I/O board.
Next steps
1. Install the
.
2. Install the
.
After working inside your computer
.
System board
Removing the system board
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
or the
, whichever applicable.
4. Remove the
.
5. Remove the
from M.2 slot one.
6. Remove the
from M.2 slot two. (if applicable)
7. Remove the
.
8. Remove the
.
About this task
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
56
Removing and installing components
