Steps
1. Slide the I/O board into the slots on the palm-rest and keyboard assembly.
2. Align the screw hole on the I/O board with the screw hole on the palm-rest and keyboard assembly.
3. Replace the screw (M2x3) that secures the I/O board to the palm-rest and keyboard assembly.
4. Connect the I/O-board cable to the connector on the I/O board and close the latch to secure the cable.
5. Adhere the tape that secures the I/O-board cable to the I/O board.
6. Connect the fingerprint reader-cable to the connector on the I/O board and close the latch to secure the cable.
7. Connect the coin-cell battery cable to the I/O board.
8. Close the left display hinge.
9. Replace the two screws (M2.5x5) that secure the left-display hinge to the palm-rest and keyboard assembly.
Next steps
1. Install the
.
2. Follow the procedure in
After working inside your computer
.
Tombol daya dengan pembaca sidik jari
Removing the power-button board
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
3. Remove the
4. Remove the
.
Melepaskan dan memasang komponen
39
Summary of Contents for Inspiron 5400 2n1
Page 1: ...Inspiron 5400 2n1 Service Manual Regulatory Model P126G Regulatory Type P126G002 ...
Page 12: ...12 Melepaskan dan memasang komponen ...
Page 13: ...Melepaskan dan memasang komponen 13 ...
Page 15: ...Melepaskan dan memasang komponen 15 ...
