Steps
1. Using the alignment posts and rubber grommets, place the speakers on the slots of the palm-rest and keyboard assembly.
2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
3. Connect the speaker cable to the system board.
Next steps
1. Install the
.
2. Follow the procedure in
After working inside your computer
.
Unit pendingin
Removing the heat sink
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
CAUTION:
For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in
your skin can reduce the heat transfer capability of the thermal grease.
NOTE:
The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before
you touch it.
2. Remove the
About this task
The following image indicates the location of the heat sink and provides a visual representation of the removal procedure.
24
Melepaskan dan memasang komponen
Summary of Contents for Inspiron 5400 2n1
Page 1: ...Inspiron 5400 2n1 Service Manual Regulatory Model P126G Regulatory Type P126G002 ...
Page 12: ...12 Melepaskan dan memasang komponen ...
Page 13: ...Melepaskan dan memasang komponen 13 ...
Page 15: ...Melepaskan dan memasang komponen 15 ...
