5. Peel the tape that secures the I/O-board cable to the system board.
6. Open the latch, and disconnect the I/O-board cable from the system board.
7. Disconnect the speaker cable from the system board.
8. Open the latch, and disconnect the touchpad cable from the system board.
9. Open the latch, and disconnect the keyboard cable from the system board.
10. Remove the two screws (M2x3) that secure the USB Type-C bracket to the system board.
11. Lift the USB Type-C port bracket off the palm-rest and keyboard assembly.
12. Disconnect the power-adapter port cable from the system board.
13. Peel the tape that secures the display cable to the system board.
14. Open the latch, and disconnect the display cable from the system board.
15. Remove the two screws (M2x2) that secures the system board to the palm-rest and keyboard assembly.
16. Lift the system board off the palm-rest and keyboard assembly.
Installing the system board
Prerequisites
Jika Anda mengganti komponen, lepaskan komponen yang ada sebelum melakukan prosedur pemasangan.
About this task
The following image indicates the connectors on your system board.
Figure 2. System-board connectors
1. Power-adapter port cable
2. Display cable
3. Fan cable
4. I/O-board cable
5. Speaker cable
6. Touchpad cable
7. Keyboard cable
8. USB Type-C port bracket
The following image indicates the location of the system board and provides a visual representation of the installation procedure.
48
Melepaskan dan memasang komponen
Summary of Contents for Inspiron 5400 2n1
Page 1: ...Inspiron 5400 2n1 Service Manual Regulatory Model P126G Regulatory Type P126G002 ...
Page 12: ...12 Melepaskan dan memasang komponen ...
Page 13: ...Melepaskan dan memasang komponen 13 ...
Page 15: ...Melepaskan dan memasang komponen 15 ...
