Steps
1. Place the power-adapter port into the slot on the palm-rest and keyboard assembly.
2. Replace the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly.
3. Route the power-adapter port cable through the routing guide on the palm-rest and keyboard assembly.
4. Connect the power-adapter port cable to the system board.
5. Adhere the tape that secures the power-adapter port cable to the system board.
6. Close the right display-hinge.
7. Replace the three screws (M2.5x5) that secure the right display-hinge to the palm-rest and keyboard assembly.
Next steps
1. Install the
.
2. Follow the procedure in
After working inside your computer
.
Panel sentuh
Removing the touchpad
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
3. Remove the
.
About this task
The following image indicates the location of the touchpad and provides a visual representation of the removal procedure.
28
Melepaskan dan memasang komponen
Summary of Contents for Inspiron 5400 2n1
Page 1: ...Inspiron 5400 2n1 Service Manual Regulatory Model P126G Regulatory Type P126G002 ...
Page 12: ...12 Melepaskan dan memasang komponen ...
Page 13: ...Melepaskan dan memasang komponen 13 ...
Page 15: ...Melepaskan dan memasang komponen 15 ...