Replacing the wireless card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Align the notch on the wireless card with the tab on the wireless-card
slot.
2
Insert the wireless card into the wireless-card slot.
3
Press the other end of the wireless card down and align the screw hole
on the wireless card with the screw hole on the system board.
4
Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the
wireless card supported by your computer:
Connectors on the wireless card
Antenna-cable color
Main (white triangle)
White
Auxiliary (black triangle)
Black
5
Align the screw hole on the wireless-card bracket with the screw hole on
the wireless card.
34
Summary of Contents for Inspiron 24 3000 series
Page 15: ...4 Lift the stand off the back cover 1 stand 2 stand bracket 3 screws 2 4 back cover 15 ...
Page 18: ...2 Lift the back cover off the computer 1 display bezel 2 back cover 3 plastic scribe 18 ...
Page 72: ...1 display assembly 72 ...
Page 78: ...15 Replace the optical drive 16 Replace the back cover 17 Replace the stand assembly 78 ...
