Replacing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Connect the microphone and camera cable to the camera module.
2
Push the tabs on the camera module into the tab on the camera-module
slot.
3
Press the camera module down into the slot on the display bezel until it
snaps into place.
4
Follow the procedure from step 1 to step 2 in ”
Replacing the
microphone
".
5
Route the microphone and camera cable through the routing guides on
the display-assembly base.
6
Connect the microphone and camera cable to the system board.
Post-requisites
1
Replace the
back cover
.
2
Replace the
stand assembly
.
50
Summary of Contents for Inspiron 24 3000 series
Page 15: ...4 Lift the stand off the back cover 1 stand 2 stand bracket 3 screws 2 4 back cover 15 ...
Page 18: ...2 Lift the back cover off the computer 1 display bezel 2 back cover 3 plastic scribe 18 ...
Page 72: ...1 display assembly 72 ...
Page 78: ...15 Replace the optical drive 16 Replace the back cover 17 Replace the stand assembly 78 ...
