Dell Inspiron 24 3000 series, Service Manual

Page: 73 / 79

Replacing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Slide the display cable through the slot on the display-assembly base.
2 Slide the tabs on the display bezel into the slots on the display-assembly
base.
3 Replace the display-assembly base on the display bezel.
4 Replace the screws that secure the display-assembly base to the display
bezel.
5 Route the optical drive and hard drive cables through the routing guides
on the display-assembly base.
Post-requisites
1 Replace the control-buttons board .
2 Replace the speakers .
3 Replace the speaker cover .
4 Replace the VESA-mount bracket .
5 Replace the system board .
6 Replace the camera .
7 Replace the microphone .
8 Replace the coin-cell battery .
9 Replace the fan .
10 Replace the heat sink .
73