Replacing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Using the alignment posts and rubber grommets on the display bezel,
place the speakers on the display bezel.
2
Route the speaker cable through the routing guide on the display bezel.
3
Adhere the tape that secures the speaker cable to the VESA-mount
bracket.
4
Replace the screw to the VESA-mount bracket.
5
Replace the rubber grommets if they are pushed up while replacing the
speakers.
6
Route the speaker cable connecting the left speaker to the right speaker
on the display-panel base.
7
Route and replace the speaker cable under the VESA-mount bracket.
8
Connect the speaker cable to the system board.
Post-requisites
1
Replace the
speaker cover
.
2
Replace the
back cover
.
3
Replace the
stand assembly
.
64
Summary of Contents for Inspiron 24 3000 series
Page 15: ...4 Lift the stand off the back cover 1 stand 2 stand bracket 3 screws 2 4 back cover 15 ...
Page 18: ...2 Lift the back cover off the computer 1 display bezel 2 back cover 3 plastic scribe 18 ...
Page 72: ...1 display assembly 72 ...
Page 78: ...15 Replace the optical drive 16 Replace the back cover 17 Replace the stand assembly 78 ...
