Dell Inspiron 13 5000 Series 2-in-1, Service Manual

Page: 72 / 139

Replacing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance .
Procedure
1 Using the alignment posts, place the I/O board on the palm rest and
keyboard assembly.
2 Align the screw holes on the I/O board with the screw holes on the palm
rest and keyboard assembly.
3 Replace the screws that secure the I/O board to the palm rest and
keyboard assembly.
4 Connect the power and volume-buttons board cable and the coin-cell
battery cable to the I/O board.
5 Slide the I/O-board cable into the connector on the I/O board and close
the latch to secure the cable.
6 Adhere the tape that secures the I/O-board cable to the I/O board.
Post-requisites
1 Replace the wireless card .
2 Replace the battery .
3 Replace the base cover .
72