2. Ship the failed part to your service provider as described in the instructions that were included with the replacement part.
3. For more information about returning customer-replaceable parts:
a. Open PowerStore Manager.
b. Click
Settings
on the upper right of the screen.
c. Click
General Support
.
d. Under
Drives, Power Supplies, and Other Parts
, click
Return Part
.
e. If your screen does not show the Return Part link, contact your service provider for instructions.
Replace an embedded module
Take the following actions to remove the faulted embedded module and install the replacement embedded module into the
system.
Identify a faulted embedded module from PowerStore Manager
Before you replace an embedded module, ensure that you have identified its location within the system. Using PowerStore
Manager, you can identify and locate a faulted embedded module.
Steps
1. From PowerStore Manager, select
Hardware
.
2. Select the appliance that includes the embedded module that you need to replace.
3. On the
Components
card, under
Rear View
, expand
BaseEnclosure
.
4. Expand the node that includes the embedded module, and then select
EmbeddedModule
.
Faulted parts appear in red in the image of the system, and report a status of
Faulted
in the
State
field.
Embedded module LEDs
Use the fault LEDs to identify the faulted part.
Figure 30. Embedded module LEDs
Table 2. Embedded module LEDs
LED
Location
State
Description
Embedded module fault
Amber
Embedded module has faulted.
Off
No fault has occurred, normal operation.
Ethernet port link
Green
Link established.
Off
No link established.
Ethernet port activity
Amber blinking
Port activity.
Off
No port activity.
SAS port and activity link
Blue
SAS port link is up.
36
Base enclosure service procedures
