Dell Inspirion, Owner'S Manual

Page: 115 / 149

114
Adding and Replacing Parts
www
.del
l.
com |
su
ppo
rt.
d
e
ll.
co
m
NOTE:
When you replace the keyboard, ensure that the keyboard tabs are completely in place to avoid
scratching the palm rest.
Bluetooth™ Card
If you ordered a Bluetooth card with your computer, the card is already installed.
CAUTION:
Before working inside your computer, read the safety instructions at the front of this
document.
1
Ensure that the work surface is flat and clean to prevent scratching the computer cover.
2
Save and close any open files, exit any open programs, and then shut down the computer (see
page 39).
3
If the computer is connected to a docking device (docked), undock it. See the documentation
that came with your docking device for instructions.
4
Disconnect the computer from the electrical outlet.
5
Wait 10 to 20 seconds, and then disconnect any attached devices.
6
Remove any installed PC Cards, batteries, and module bay devices.
NOTICE:
Handle components and cards by their edges, and avoid touching pins and contacts. Ground
yourself by touching a metal connector on the back of the computer. Continue to ground yourself
periodically during this procedure.
7
Remove the hard drive.
M2.5 x 5-mm
screws (2)
keyboard tabs
palm rest