manualshive.com logo in svg

Dell Inspirion 3656, Service Manual

Share
Download
Dell Inspirion 3656 Service Manual Download Page 40

Removing the antenna modules

NOTE: 

Before working inside your computer, read the safety information that shipped with your computer and follow 

the steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After 

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at 

www.dell.com/regulatory_compliance

.

Topics:

•

Prerequisites

•

Procedure

Prerequisites

1. Remove the 

computer cover

.

2. Remove the 

front bezel

.

3. Remove the 

wireless card

.

Procedure

1. Remove the antenna cables from the routing guides on the side-chassis.
2. Gently slide the antenna cables through the routing holes on the side-chassis.

a. antenna cables
b. routing guides
c. routing holes (2)

3. Close the side-chassis.
4. Using a plastic scribe, gently pry the antenna modules off the side-chassis.

22

40

Removing the antenna modules

Summary of Contents for Inspirion 3656





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands