manualshive.com logo in svg

Dell Inspirion 3656, Service Manual

Share
Download
Dell Inspirion 3656 Service Manual Download Page 39

Replacing the wireless card

NOTE: 

Before working inside your computer, read the safety information that shipped with your computer and follow 

the steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After 

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at 

www.dell.com/regulatory_compliance

.

Topics:

•

Procedure

•

Post-requisites

Procedure

1. Align the notch on the wireless card with the tab on the wireless-card slot.
2. Slide the wireless card at an angle into the wireless-card slot.
3. Connect the antenna cables to the wireless card.
4. Slide the wireless-card bracket over the wireless card.
5. Replace the screw that secures the wireless card to the system board.

1. tab

2. notch

3. wireless card

4. wireless-card slot

5. antenna cables

6. wireless-card bracket

7. screw

6. Close the side-chassis.

Post-requisites

1. Replace the 

front bezel

.

2. Replace the 

computer cover

.

21

Replacing the wireless card

39

Summary of Contents for Inspirion 3656





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands