manualshive.com logo in svg

Dell Inspirion 3656, Service Manual

Share
Download
Dell Inspirion 3656 Service Manual Download Page 54

Replacing the power-supply unit

NOTE: 

Before working inside your computer, read the safety information that shipped with your computer and follow 

the steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After 

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at 

www.dell.com/regulatory_compliance

.

Topics:

•

Procedure

•

Postrequisites

Procedure

1. Slide the power supply towards the back of the chassis.
2. Align the screw holes on the power-supply unit with the screw holes on the chassis.
3. Replace the screws that secure the power-supply unit to the chassis.
4. Route the power cables through the routing guide and connect the power cables to the system board.
5. Close the side-chassis.

Postrequisites

1. Replace the 

front bezel

.

2. Replace the 

computer cover

.

31

54

Replacing the power-supply unit

Summary of Contents for Inspirion 3656





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands