Dell Inspirion 3656, Service Manual

Page: 65 / 68

1. jumper plug 2. pin 1
3. pin 2 4. pin 3
5. Close the side-chassis.
Post-requisites
1. Replace the front bezel .
2. Replace the computer cover .
Clearing CMOS Settings
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer . After working inside your computer, follow the instructions in After
working inside your computer . For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance .
Prerequisites
1. Remove the computer cover .
2. Remove the front bezel .
Procedure
1. Open the side-chassis.
2. Remove the jumper plug from pins 2 and 3 and replace it on pins 1 and 2.
3. Wait for 5 seconds.
4. Remove the jumper plug from pins 1 and 2 and replace it on pins 2 and 3.
BIOS setup program 65