Replacing the front-panel light board
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
Topics:
•
•
Procedure
1. Align the screw holes on the lighting modules with the screw holes on the chassis.
2. Replace the screws that secure the lighting module to the chassis.
3. Slide the cable through the side-chassis and open the side-chassis.
4. Route the lighting cable through the routing guides on the chassis.
5. Connect the lighting cable to the system board.
6. Close the side-chassis.
Post-requisites
1. Replace the
2. Replace the
.
29
Replacing the front-panel light board
51
Summary of Contents for Inspirion 3656
