manualshive.com logo in svg

Dell Inspirion 3656, Service Manual

Share
Download
Dell Inspirion 3656 Service Manual Download Page 37

Removing the wireless card

NOTE: 

Before working inside your computer, read the safety information that shipped with your computer and follow 

the steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After 

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at 

www.dell.com/regulatory_compliance

.

Topics:

•

Prerequisites

•

Procedure

Prerequisites

1. Remove the 

computer cover

.

2. Remove the 

front bezel

.

Procedure

1. Open the side-chassis.

a. side-chassis

2. Remove the screw that secures the wireless card to the system board.
3. Slide the wireless-card bracket off the wireless card.
4. Disconnect the antenna cables from the wireless card.
5. Slide and remove the wireless card from the wireless-card slot.

20

Removing the wireless card

37

Summary of Contents for Inspirion 3656





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands